Mato just raised pre-seed Read more
Podcast charts
Published by Bob "The Knife Junkie" DeMarco
The Knife Junkie podcast is the place for knife newbies and experience knife collectors to learn more about knives and knife collecting and become true "knife junkies." Twice per week, Bob DeMarco talks knives and brings you special sections such as Knife Life News, pocket checks and more. In addition, your calls and comments will be featured on the podcast -- dial The Knife Junkie Listener Line at 724-466-4487. And be sure to visit The Knife Junkie online at www.theknifejunkie.com
On the charts
Every published chart this podcast appears in, in the snapshot behind this page. Each one links to the chart it came off.
The Mato Topic Intelligence Platform does not report this podcast as charting in a published category in this snapshot.
From the feed
The latest episodes published to this podcast’s own RSS feed. Titles and descriptions are the publisher’s.
What makes a pocket knife truly great at everything? In Episode 676, Bob DeMarco builds a list of 10 great \"do everything\" pocket knives, and the ground rules are strict. The knife has to handle everyday cutting tasks without a second thought. It has to be a credible self-defense option with solid ergonomics and the right blade geometry. And it has to be something you would be glad you had if a short hike turned into an unplanned overnight in the woods. None of the usual suspects made the list. No Griptilian, no Bugout, no PM2, no Military 1, and no Buck 110. Just 10 knives that Bob says deserve more credit in this category. The 10 are the Spyderco Stretch 2XL, Cold Steel Karve, Microtech SOCOM Elite Ram-Lok, Ritter Hogue RSK Mk1, Manganas Steel Aurelia, Artisan Kami, Civivi Sentinel Strike 2, Kansept Deadite, Off-Grid Knives Stinger XL, and the North Mountain Blade BBMN. Bob walks through each one, covering blade geometry, handle ergonomics, lock strength, steel choice, and exactly why each knife earns a spot on the list. Before the main segment, Bob runs through a pocket check featuring the Spyderco Military 2 in CruCarta, the Jack Wolf Knives Gateway Bison fixed EDC, the SOG SEAL Pup, and the Cold Steel Natchez Bowie. He also shows off a generous box of fixed blades sent in by his friend Craig, known as Fishbag during Thursday Night Knives, including a Green River 4215, an Ontario Old Hickory 7026, a Cold Steel Leatherneck, an Ontario pilot knife, and a Case USMC fighting utility knife. Knife Life News covers a GiantMouse Kickstarter collaboration with Jackass star Chris Pontius, a new modular EDC from Work Sharp called the Madrone, and expanded offerings from Pennsylvania maker Kestrel Knives. The First Tool segment tells the story of the Gerber Mark II, a knife designed in 1966 by retired Army Captain Bud Holzman, drawing on the ancient Roman Mainz Gladius and the Fairbairn-Sykes dagger used by British commandos. It earned its name in Vietnam, appeared in The Road Warrior and Alien, and became one of the most recognizable combat knives of the 20th century. Bob also shares the curious story of early canted-blade versions being returned by buyers who thought they were bent, making those originals among the most collectible today. Whether you have a short list of go-to EDC folders or you are still building it, this episode gives you ten names worth considering and a clear set of reasons why each one belongs there. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/676. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
What does a serious Spyderco collection look like? In Episode 675 of The Knife Junkie Podcast, host Bob DeMarco walks through his complete lineup of Spyderco folders, from the iconic Military and Military 2 in CruCarta to the Native Chief Salt series in MagnaCut to the full Yojimbo family designed by Michael Janich. Bob shares the personal stories behind each knife, including a purple Delica 4 named Sleepy Bear by his daughter and a Police Model OG he first saw in a Philadelphia bike shop decades ago. He also gives a short but solid history of Spyderco, from Sal and Joanne Glesser sharpening knives at swap meets to the company leading the industry in steel experimentation, grind quality, and constant design updates. Before the Spyderco rundown, Bob covers the First Tool segment on the Pattada, a traditional Sardinian folding knife carried by shepherds and craftsmen for generations. He also reviews two new pieces in the State of the Collection: the Jack Wolf Knives Gateway Bison, the first fixed blade in the Gateway line, and a Cold Steel Kobun sent to Matthew Culbertson for his custom single-scoop serration treatment. The Kobun came back with the sharpest edge Bob has ever had on that knife. The episode also includes Knife Life News with three stories worth knowing about: the Civivi Iron Tide collaboration with Pete McKinnon of Pete Pirate Life, the Zero Tolerance ZT 0020 20th anniversary knife using Vegas Forge Lytic Damascus at 700 dollars, and three new Kershaw releases heading into Blade Show. The pocket check features the Emerson CQC-13, the Rosecraft Blades French Broad Jack, the Hogtooth Knives NoVA-2, and a Jed Hornbeak Necromance that Bob called one of the finest knives he owns. Whether you have one Spyderco or 20, this episode will make you look at the lineup in a new way. Bob is clear that this is not the end of his Spyderco coverage—his fixed blades are still coming. If you are a fan of the brand or just want to hear what 20-plus years of knife collecting sounds like, this is the episode. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/675. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
Episode 674 of The Knife Junkie Podcast is a deep look at daggers—one of the most discussed and most misunderstood blade categories in the knife community. Bob DeMarco brings out twelve daggers for a collection update that covers everything from a World War II-era KA-BAR/EK Commando Knife to a Microtech SBD trade pickup he had been hunting for years. The lineup includes the Randall Knives Model 2-7 Combat Stiletto, Cold Steel Peace Keeper II, Spartan Harsey Dagger, Spartan George Raider Dagger, and the Cold Steel Tai Pan in San Mai, among others. Bob talks grip technique, blade geometry, what Cold Steel gets right about the slash, and why some daggers are better suited to thrusting while others handle both jobs well. Before the dagger segment, Bob runs a pocket check from a real working day—assembling a shed in the backyard—featuring the Spyderco Manix 2 Lightweight in S110V, the Fisher Blades Harvey PK, the Edgy American Blades Junkie in CruWear, and a Cold Steel Laredo Bowie that was standing by just in case. The episode also features the First Tool segment on the Scottish Highland basket-hilt broadsword, covering its role in the Jacobite risings and its significance to Highland culture since the Battle of Culloden in 1746. The State of the Collection segment features a custom seax from Matt Chase of Hogtooth Knives—pattern-welded from 1085, 15N20, and nickel, with elk antler and Micarta scales and a hand-engraved leather sheath—that Bob called his unofficial Blade Show purchase for 2026. Bob also shows off a six-knife Cordura carrying case and hand-thrown stoneware mug from Terzuola Design, sent by merch czar Ben Odi. Knife Life News covers Spyderco Reveal 21 highlights, including a Mickey Yurco Gunting collaboration, the CRKT Squid II with M390 and wood handles, the Boker Overnighter by FP Knives, and the upcoming Civivi Almaris slipjoint. Whether you are a longtime dagger collector or just starting to pay attention to double-edged blades, Episode 674 gives you a thorough and entertaining look at why this category deserves a place in any serious collection. Bob wraps up with plans to keep growing the dagger side of his collection, so this is not the last time the topic comes up. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/674. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
Bob DeMarco welcomes Al Salvitti of Regiment Blades to Episode 673 of The Knife Junkie Podcast for one of the most grounded, experience-driven conversations the show has had in a long time. Salvitti brings 52 years of martial arts training, 15 years of real-world bouncing experience in Philadelphia and South Jersey, and a knife design built entirely around what actually works when fists are flying. This is not a conversation about what looks good in a video — it is a conversation about what kept a small guy standing in packed bars where fights broke out five times a night. Salvitti traces his path from taekwondo black belt to Philadelphia boxing gyms to Sayoc Kali under Tuhon Chris Sayoc, explaining how each layer of training changed his thinking about power, timing, and weapons. He developed a full-body power-striking system grounded in keeping both feet on the ground and using the skeletal frame instead of just the shoulder—a method that has been taught to Navy SEALs, Marine units at Camp Pendleton, and Border Patrol agents. He also shares what those experiences taught him about why complicated techniques fail under real stress and why simplicity wins every time. His LowViz punch blade at regimentblades.com came directly out of those lessons: a blade that deploys in the same motion as a punch, grips like a pistol, and rides flat on the belt in a sheath that Salvitti engineered himself, because every other option on the market failed to meet his standards. The big story of the episode is the connection between the Regiment Blade and bestselling thriller author Jack Carr. Salvitti sent Carr a custom LowViz and, months later, discovered that Carr had written the knife into his new novel, \"The Fourth Option,\" with full credit to Salvitti by name. The main character carries the Regiment Blade. A chapter of the book covers a knife fight in the dark using the weapon. Carr described it in print as \"designed to be an extension of your hand\"—words that Salvitti said captured exactly what he built it to be. Salvitti and maker John Gray produced 175 custom Fourth Option editions with acid-etched finishes and pinned wood handles for the book launch, and a production version of the Fourth Option LowViz is currently in progress. The episode also covers Salvitti\'s approach to situational awareness and what he posts on the Regiment Blades Instagram: real street-violence footage, shared not for shock value but to show people what unscripted violence actually looks like. No flying kicks. No fancy blade work. Just speed, aggression, and whoever prepared better. His philosophy is direct: the wheel is always spinning, and training before it stops on you is the only option worth taking seriously. For full show notes, past episodes, and more from The Knife Junkie, visit theknifejunkie.com. Find the Regiment Blades lineup, including the LowViz fixed blade, the folder, and news on the Fourth Option production run, at regimentblades.com. Training videos and real-world fight analysis are posted regularly on the Regiment Blades Instagram. Be sure to support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. You can also support The Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
What happens when one knife brand builds its entire identity around traditional American slip-joint patterns and then starts making locking, flipping versions of every single one? You get a collection that is hard to look away from. In Episode 672 of The Knife Junkie Podcast, host Bob DeMarco puts the full lineup of locking Jack Wolf Knives folders on camera, showing each one beside the slip-joint sibling that inspired it. Designer Ben Belkin has been at this for a while now, and seeing the whole collection together tells a story that no single knife can tell on its own. Before getting to the main segment, Bob runs a pocket check featuring the Spyderco Military (the original, not the Military 2 he is thinking about buying), the Great Eastern Cutlery #15 Boy\'s Knife, the Brock Blades Magni XL in 3V steel, and the CRKT HZ6 (ESK) from designer James Williams. Knife Life News covers four standout releases: the CRKT M16 nearly 30th anniversary edition at $48, the long-awaited TOPS Badger Creek at $300, the We Knife Notchline at $254, and the Civivi High Grass bird-and-trout fixed blade at $63. Bob also walks through the history of the Kephart knife in the show\'s \"First Tool\" segment, covering how Horace Kephart arrived at one of the most copied camp knife designs in history. The State of the Collection introduces four recent additions: the Spyderco Native Chief in CPM-CruWear and Crucarta, the Spyderco Yojimbo 2 Breast Cancer Awareness Sprint Run in hot pink and black (exclusive at Knives Ship Free), the Fisher Blades Harvey PK compact fixed blade, and a preview of the brand new Jack Wolf Knives Feelbetter Jack, the knife that inspired the entire main segment and the May 2026 release from the brand. The main segment walks through all seven locking Jack Wolf Knives models: the Gunslinger Jack (three runs), the Afterhours Jack, the Diamondback Jack (Bob\'s personal favorite in the whole lineup), the Primo Jack, the Bionic Jack, the Benny, and the Feelbetter Jack. Each locking folder appears alongside the slip-joint it came from, giving a rare look at how Belkin translated traditional patterns into modern locking folders without losing what made the originals worth building in the first place. Full-height hollow ground S90V blades, premium bolsters, and meticulous fit and finish across the board. Whether you own a Jack Wolf Knives knife, have one on the wish list, or have just been hearing the name and wondering what the fuss is about, this episode will show you everything you need to know. Bob has carried and used these knives, not just collected them, and that comes through in every comparison on screen. Find the list of all the knives shown in the show and links to the Knife Life News stories at https://theknifejunkie.com/672. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
Lynn Thompson founded Cold Steel Knives in the early 1980s and ran it for about 40 years, building it into one of the most recognized tactical knife brands in the world. After selling to GSM Outdoors and honoring his non-compete through June 2025, Lynn is back with something new: Lynn Thompson Tactical Knives, available at NeverUnarmed.com. On Episode 671 of The Knife Junkie Podcast, host Bob DeMarco sits down with Lynn for a wide-open conversation about where it all started and where it is going. Lynn traces his love of knives back to wooden ones his father made for him when he was a four-year-old growing up in Brazil. That passion led him to build his first push daggers in 1980, years before the word \"tactical\" was applied to knives as a category. After breaking two Gerber Mark II blades during backyard training, he set out to design a knife with an unbreakable point—and that drive eventually produced the Tanto, with the final Trail Master design sketched on a placemat at the Pierpont Inn in Ventura. Bob and Lynn also discuss the sub-hilt fighter, the history of the push dagger from the katar to the riverboat South, and the debate between double-edged and single-edged blades. Lynn is a serious practitioner, not just a designer. He trains with blades four sessions a week in a gymnasium stocked with $80,000 worth of aluminum training weapons, working with students and training partners on knife fighting, Bowie work, and combative research across multiple martial systems. He talks about what he would fix on the Trail Master guard, how fighting with a Bowie taught him to use the crossguard, and why he believes the Bowie knife is one of the hardest fighting tools to beat when it is built and balanced correctly. Lynn Thompson Tactical Knives is launching with 35 knives, including two new Bowie designs, the Japanese Quaken, a cutlass, and plans for sword canes. His new factory has 12 five-axis CNC grinding machines, robotics, automatic sharpeners, and polishing equipment that he calls the best he has ever had access to. You can find Lynn and the full lineup at Blade Show 2026 in Atlanta at booth 2413 in the secondary room and online at NeverUnarmed.com. This is one of the most knowledge-packed conversations in the history of The Knife Junkie Podcast. Whether you collect Cold Steel, study knife history, or just want to hear one of the legends of the knife world talk about what he is building next, this episode is required listening. Be sure to support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. You can also support The Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
Episode 670 of The Knife Junkie Podcast is all about great high-end knife carry combinations, and host Bob DeMarco brings seven of them to the table. Each pairing follows two simple rules: never carry two knives from the same company, and never carry two knives with the same blade shape. The result is a thoughtful and practical look at how to build a multi-knife carry that actually makes sense. Whether it is a heavy-duty folder paired with a slim fixed blade, a large clip point paired with a straight-edge Wharncliffe, or a utility folder paired with a defensive fixed blade, Bob breaks down the logic behind every combo. Before getting to the carry combos, Bob runs a full pocket check featuring the Off-Grid Knives Polaris XL in Vanax SuperClean steel, the Jack Wolf Knives Feelgood Jack in S90V, the Dirk Pinkerton Matador with its JL Hansen and Son handle scales, and the Edgy American Blade Works Junkie, a Seax-style fixed blade by Shane Gable in Cru-Wear at 64 HRC. He also covers four notable new releases in Knife Life News: the Bestech Kobber designed by Jake Diaz of Happy as Larry, the RoseCraft Blades Birchfield Camp Jack, the Civivi Dracolis Balisong trainer, and the TOPS Snake River Rescue dive knife by John Garcia. The \"First Tool\" segment of this episode covers the Seax, the single-edged blade of the Anglo-Saxons, Franks, and Vikings that served as the original everyday carry knife throughout early medieval Europe. Bob traces the Seax from its role as a farmer\'s tool and a warrior\'s weapon to its appearance as a decorated object of identity, including the famous Seax of Beagnoth found in the River Thames. He also draws a direct line from the broken-back Seax profile to the modern clip point, connecting a thousand years of blade design in a few short minutes. The State of the Collection segment adds more to an already full episode, with Bob showing the Spyderco Lum Tanto and Cold Steel El Vaquero acquired from Dirk Pinkerton, plus the brand-new Fisher Blades Harvey PK, the first EDC knife from Chaz and John Fisher of Fisher Blades. A set of custom leather XL Espada sheaths from patron Cesario Aton rounds out the segment. Bob also spotlights the 3 Dog Knife affiliate offer (25% off with code \"knifejunkie\" at theknifejunkie.com/3dogknife) and the Patreon-exclusive \"American Edge 250\" series, which covers historical American blade designs in honor of the 250th anniversary of the United States. Whether you are building your own two-knife carry or just love seeing high-quality blades presented by someone who genuinely cares about them, Episode 670 delivers from the first minute to the last. Bob wraps it up with a question for the community: What carry combos are you running? Drop your answer in the comments and bring it to Thursday Night Knives, every Thursday at 10 p.m. Eastern on YouTube and Twitch. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/670. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
What does it take to turn a 40-plus-year obsession with blades into a YouTube channel worth watching? Joe Steel of The Steel Mindset can answer that question. In Episode 669 of The Knife Junkie Podcast, host Bob DeMarco sits down with Joe for a conversation that covers the origins of a lifelong passion, the craft and culture behind the katana, top production sword brands, and what it is like to build a knife and sword channel from the ground up while living in one of the least collector-friendly states in the country. Joe Steel traces his love of blades to May 14, 1982, the opening day of Conan the Barbarian. The forge scene at the start of that film hooked him at age nine, and the obsession never let go. He grew up collecting flea-market swords, bringing blades back from travels abroad, and absorbing everything he could find about bladecraft long before the internet made that easy. When the 2020 shutdown ended his career in live event production overnight, he discovered the YouTube sword-review community and made a decision: he had the production skills, equipment, and knowledge. He was going to make his own videos. The Steel Mindset channel was born from that decision. Much of this episode focuses on the katana, and for good reason. Joe talks about studying Japanese culture and sword forging since his teen years, reading about tamahagane steel, the quenching process that creates the blade\'s natural curve, and the remarkable fact that the katana was designed to be disassembled. A single bamboo peg called the mekugi holds the entire sword together. The tang of the blade, the nakago, reveals the level of care a maker put into the work. Joe explains all of it with the kind of detail that only comes from decades of genuine study and collecting. Joe also discusses the top production katana companies available right now, including Citadel, Motohara Evolution Blades, and Hanwei, as well as American smiths Walter Sorrells and Howard Clark. He touches on the strict laws governing katana ownership in Japan, where blades must be registered like firearms and can only be legally owned if they were made on Japanese soil. Bob and Joe also talk through the challenges of collecting knives in New York State, where the laws are strict, and Amazon will not ship knives to a residential address. Beyond The Steel Mindset channel, Joe co-hosts the Blade Talk with Joe and Scab podcast with Scott Baldwin, known as Scab of Choirboyz Cutlery Outdoors. The show has brought in a number of well-known names from the knife world, and the chemistry between a New York voice and a Southern one makes for great listening. Joe is also heading to the Blade Show in Atlanta and working toward surpassing the 10,000-subscriber mark on his channel. Find Joe and The Steel Mindset on YouTube at www.youtube.com/@JoeSteel1 and on Instagram at www.instagram.com/the_steel_mindset. Be sure to support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. You can also support The Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
In Episode 668 of The Knife Junkie Podcast, host Bob DeMarco tackles a subject that sits right at the intersection of utility and self-defense: folding knives with straight cutting edges. Bob walks through 12 folders that all share a flat or nearly flat edge profile, and he explains the geometry behind why these blades transfer more force to the tip on a slash or thrust than a curved edge does. Whether you carry a knife for everyday work or are interested in personal protection, this episode offers plenty to think about and plenty of steel to admire. Before getting to the main topic, Bob covers a strong pocket check featuring the Emerson Knives P-SARK, the Spyderco Delica 4 (known in the household as Sleepy Bear), the Microtech SBD Dagger, and the Hogtooth Fighting Bowie. The Knife Life News segment covers three notable releases: the 100th Buck of the Month featuring the Drop Point 112 Ranger in S35VN, the new TOPS Sidekick Diver from designer Anna Espinosa, and a sharp-looking Buck Range Elite Stealth Run with gold-thread carbon fiber and a tritium thumb stud. The First Tool segment covers the 1918 Trench Dagger, officially known as the US Mark I Trench Knife. Bob covers the history behind its design, including why soldiers needed something compact and fast for trench warfare, what made the bronze knuckle guard so distinctive, and why collectors still prize original examples today. This particular knife was a gift from Bob\'s brother, and the personal story behind it adds to an already fascinating segment. The State of the Collection segment gives two older knives some well-deserved attention: the Real Steel H6 Blue Sheep, one of the first Real Steel knives to reach the American market, and the Sencut Waxahachie, a clip-point fixed blade with a great profile and a low price. Then the show moves into the main event, where Bob walks through twelve folding knives with straight cutting edges, including the Hinderer XM-24 Wharncliffe, the Kansept Main Street, the Pinkerton Knives Standoff, the ABW Model 2, the Northmountain Blade BBMN, the Shieldon Knives REV, the Off-Grid Knives Black Stallion, the Sencut Awassi, the Artisan Cutlery Proponent, the Jack Wolf Knives Diamondback Jack, the QSP Penguin, and the Spyderco Yojumbo. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/668. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
On Episode 667 of The Knife Junkie Podcast, host Bob DeMarco sits down with two of the most well-known brothers in the online knife community: Austin Culbertson, known on YouTube as Hissatsu5, and his brother Mathew Culbertson. The Culbertson brothers have been making knife videos for close to 20 years, starting with water bottle cut tests filmed on a bad camera, and building their channels into trusted resources for knife owners who want to know what their blades can actually do. One area of discussion in this episode is serrations and why they matter more than most people think. The brothers reveal that denim has a level 1 cut-resistance rating, meaning a razor-sharp, plain edge can bounce off denim without cutting through. Their testing shows that serrated edges close that gap and guarantee a bite that a plain edge sometimes cannot. Mathew walks through the pros and cons of Veff serrations, Cold Steel serrations, and Spyderco serrations, and describes the custom large flat top serration pattern he has developed for his own carry knives. He also covers a single oversized serration near the tip of a tanto blade that boosts performance on snap cuts — what he calls the \"snap master.\" The conversation includes why both brothers carry knives as tools of defense. Austin started carrying in high school after the Virginia Tech shooting. Mathew is a prison chaplain who cannot carry a firearm on the job and trains with knives every Sunday alongside his brother. Both brothers make a strong case for the knife as a practical carry tool, covering Texas self-defense law, the limits of firearms in restricted locations, and the ways a knife can save a life that a gun cannot. Bob asks both brothers about the deeper pull that knives have on the people who collect and carry them. Austin points to the knife as the first tool humans made with real intention. Mathew describes it as a symbol of justice, truth, and the responsibility to protect others. The episode also features a long look at Bowie knife history, including trainer knives made by Bobby Raines, a tour of the Bowie knife exhibit at the Little Rock, Arkansas, Museum, and a discussion about how historical Bowies took very different forms across different regions and eras. Find Austin Culbertson on YouTube at https://www.youtube.com/@Hissatsu5 and Instagram at https://www.instagram.com/p/DG4dLfrMvjz. Find Mathew Culbertson on YouTube at https://www.youtube.com/@mathewrculbertson and on Instagram at https://www.instagram.com/matrculbertson. For the full episode and all show notes, visit www.theknifejunkie.com/667. Be sure to support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. You can also support The Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
Episode 666 of The Knife Junkie Podcast opens with a comment that cuts straight to the point. A viewer described surviving a serious rollover accident, trapped upside down and unable to free himself from a seatbelt, as smoke filled the car. That experience turned him into a lifelong knife carrier. Host Bob DeMarco uses the story to set up the entire episode: a pocketknife is not just a hobby. When things go wrong fast, what you carry and how fast you can open it can matter more than you expect. Before getting to the main topic, Bob runs through a four-knife pocket check that includes a custom Spyderco SpydieChef modified by Mike Emler, a Jack Wolf Knives Gateway Barlow in Miami camo carbon, the TKell Knives Agent 001 from the first production run, and a Randall Made Model 2-7 combat stiletto. He also runs through the full Agent series lineup and the latest history installment from the Patreon, The American Edge 250: The Reclaimed Edge. Knife Life News covers four new releases worth knowing about: the We Knife Co. Dracarys with dragon-scale milled titanium handles, the GiantMouse Reddington, built in partnership with the U.S. SERE school, the Sencut Braxx slip joint, and a handsome new swayback from Bear & Son Cutlery. The First Tool segment takes a close look at the yatagan, the Ottoman short blade carried by the Janissaries for roughly four centuries. Bob covers the blade shape, the history of its use, and the surviving museum examples that show just how beautiful these working weapons could be. He shows two modern blades inspired by the Yatagan, including a personal TKell Knives collaboration he hopes to put into production. Then he talks about the Cold Steel SRK-C, a compact version of one of the most trusted fixed blades in the catalog, which he picked up on Amazon for $27 and spent a full weekend putting to work. The main topic for Episode 666 is 10 waveable folders. The Emerson wave is a raised feature on the blade spine that catches the pocket on the draw, opening the knife automatically. Bob covers ten folders that use this concept, from the original Emerson Seax to the Cold Steel Espada XL, including the Byrd Cara Cara 2, Cold Steel TiLite, Fox 599 Karambit, DC Blades Sting, Pinkerton Knives Ringed Inversion, Zero Tolerance 0620, CRKT M16-14ZSF, and the Arcane Design Antimatter. Each knife gets a close look at how and why the wave or wave-equivalent feature works, what makes it useful in a real carry context, and what sets each one apart. Whether you carry for utility, self-defense, or the love of a well-made folding knife, this episode gives you a practical framework for understanding one of the most useful features a folder can have. Bob brings real carry experience to every knife on the list, and the depth of the conversation reflects it. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/666. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
On Episode 665 of The Knife Junkie Podcast, host Bob DeMarco welcomes David Baker, the historic weapons recreation specialist, bladesmith, and longtime Forged in Fire judge who has spent decades building some of the most accurate weapon replicas on television. Before he ever touched a forge, Baker was dancing in Grease 2 and acting in Hollywood. A knee injury, a stage combat class, and a chance to watch the legendary Jody Samson at work eventually pointed him toward the craft that would define his career. Baker walks through his early years building stage swords in Burbank, the Spanish TV production Queen of Swords that launched his professional weapon-making business, and how he landed on Deadliest Warrior before eventually becoming a fixture on Forged in Fire. His job on the show went far beyond judging. He was the one building the example weapons, often working under a 10-hour deadline, sometimes in the early morning before the crew arrived, and sometimes late at night after everyone had gone home. He shares the lessons that experience taught him, including the clever salt trick one colorblind smith used to time his quench. The episode shifts to Baker\'s new project: a self-produced motorcycle travel-and-historical-weapons show called Baker\'s Blades. The concept is simple and compelling. Baker rides his 2016 Indian Vintage motorcycle to locations across the United States associated with historically significant blades, researches the weapon\'s history, gains access to original or related artifacts, and then recreates the piece in his shop. The pilot episode was filmed near the National Museum of the United States Army. A sizzle reel is already live on YouTube at @BakersBlades . Baker also opens up about why studying original weapons in person matters so much. His four benchmarks for any blade are weight, scale, edge geometry, and balance, and he explains how handling actual historic pieces at museums around the world has shaped everything he builds. He talks about the small details that most people never see: the angle of a basket hilt, wear marks from resharpening, and even file marks left by craftsmen hundreds of years ago. Those details, he says, are a direct connection to the makers who came before. Baker also shares the story of watching veterans and first responders find something powerful at the forge, channeling anger and tension into a piece of steel and coming out the other side holding something they built with their own hands. To learn more about David Baker and see his work, visit davidbakerknives.com. Follow him on Instagram at @bakerblades, connect on Facebook, and subscribe to Baker\'s Blades on YouTube before the full release. Be sure to support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. You can also support The Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
In Episode 664 of The Knife Junkie Podcast, host Bob DeMarco celebrates the clip-point blade shape with a showcase of 10 clip-point and bowie-style knives he added to his collection over the past year. From the updated Cold Steel Trailmaster Bowie in 3V to a custom Hogtooth Knives Fighting Bowie inspired by Bill Bagwell, Bob walks through each knife with the kind of detail and enthusiasm that only a true collector can deliver. You will hear about the history, the steel, the handle materials, and the personal stories behind every blade. The episode also features a loaded Knife Life News segment covering four new releases. Boker dropped the Fructis Flipper, designed by Stephane Espi. Ostap Hel collaborated with We Knife Co. to create the Tryon, a large M390 folding knife. RoseCraft Blades released the Snake Creek copperhead. And Civivi announced a new slip joint for 2026. Bob breaks down the specs, pricing, and his take on each one. In the First Tool segment, Bob tells the story of the V-44 Marine Raider Bowie and the Collins No. 18. These WWII-era jungle survival knives became symbols of the Marine Raiders and their Gung Ho spirit. Bob also introduces the brand new Jack Wolf Knives Pioneer FIXedc, a fixed-blade sodbuster in S90V with pink abalone handles that his wife immediately claimed as her own. The April 2026 Gentleman Junkie giveaway knife is the Shed Knives 2026 Tanto, available to Patreon supporters on the Gentleman Junkie tier. Whether you collect Bowie knives, carry fixed blades, or just love hearing about great knives, this episode has something for you. Bob wraps up the show with a simple truth: the clip point has stolen his heart, and he has no plans to stop collecting them anytime soon. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/664. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode, and leave a rating and a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
On Episode 663 of The Knife Junkie Podcast, Bob DeMarco sits down with Gary Creely of Creely Blades, a custom knife maker and pastor from Pennsylvania, who is building a high-performance knife company focused on top-tier steels, smart heat treatment, and blade geometry that cuts. Gary shares how he went from fishing the Schuylkill River with a cheap carbon-steel toothpick knife to running a growing operation with CNC grinding, a laser cutter, and a goal of producing 2,000 knives a year. He discusses his early adoption of MagnaCut, the transition from CPM, and why he does not chase maximum hardness numbers. The conversation covers the business realities of making knives in the United States, the role of 3D-printed scales and Kydex in reducing costs, and how Gary developed his own diamond-stropping compound. He also teases two new models, including a clip-point fixed blade with the working name \"The Medium.\" Find the full show notes at https://www.theknifejunkie.com/663. Learn more about Gary and his knives at https://creelyblades.com, on Instagram at https://www.instagram.com/creelyblades, and on YouTube at https://www.youtube.com/@Creelyblades. Be sure to support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. You can also support The Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
Bob DeMarco counts down 15 of his favorite nasty little knives built for self-defense and concealment on Episode 662 of The Knife Junkie Podcast. From the Shivworks Clinch Pick, born from real-world undercover encounters, to the Station IX No.4 SOE Lapel Dagger, inspired by World War II spy weapons, these are blades that stay hidden and stay ready. Bob shares the stories behind each knife, explains what makes them effective, and talks about why small fixed blades deserve a place in your carry rotation. Before the main topic, Bob runs through a loaded Pocket Check featuring the Strider SMF CC, the Jack Wolf Knives Gateway Barlow in Miami camo carbon, the AUX MFG Mini Spike, and the Boker Arbolito Bowie. He also gives a TKell Knives spotlight, covering the MR1, the Agent 001, and the Frogman Field Knife, along with details on how to get 10% off with the Knife Junkie coupon code. In Knife Life News, Bob covers the Buck of the Month 838 Deploy Auto in Magnacut, the TOPS Upswarm designed by blade grinder Eric Mooney, the We Knife Inceptus from Robert Saniscalchi, and the new Civivi Overyonder designed by Zac Whitmore. The First Tool segment takes a look at the Hira-Zukuri, a Japanese blade form with no shinogi ridge, and the State of the Collection features the Smith Tinder Maker for fire-starting kits. The 15 nasty little knives include the Shivworks Clinch Pick, Cold Steel Urban Edge, Kopis Designs L-Via, Fudo Forge Scalpel, Shed Knives Skeletal Skur, Bastinelli Anomaly, TKell FLN, 310 Forge Scalper, AUX MFG Broadhead, Station IX No.4 SOE Lapel Dagger, Failed Negotiations Pikal, Gunfighter Customs Gunfighter, Regiment Blades Low-Viz, TOPS Ephyra, and the Pinkerton Broadhead. Whether you carry for self-defense or just love seeing purpose-built small fixed blades, this episode is for you. Bob brings real knowledge and obvious enthusiasm to every knife on the list, and the stories behind them are just as interesting as the knives themselves. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/662. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
Bob DeMarco shows off his growing Microtech knife collection in Episode 661 of The Knife Junkie podcast. Starting with the SOCOM Elite, which represents so many firsts in his knife life, Bob walks through the SOCOM Elite Auto, the SOCOM Bravo made by Rike Knives, the SOCOM Elite Ram-Lok, the LUDT Gen 3, the Ultratech and Troodon double-edged out-the-fronts, the Stitch (a Borka Blades collaboration), and the new Amphibian with a Ram-Lok. He even pulls out a clone of the Stitch to show the difference between the real thing and a knockoff. Before the Microtech segment, Bob runs through a stacked pocket check featuring the Off-Grid Knives Polaris XL in Vanax steel, the Spyderco MicroJimbo, the Cold Steel Urban Edge push dagger, the TKell Knives Adversary, and the Cold Steel Mayhem. In the Knife Life News, he covers the Artisan Cutlery Trust, the Boker Sledgedog, the Sencut Securis, and two new Buck EDC folders, the Ferrox and the Nomad. The First Tool segment tells the story of the Pesh Kabz, a Persian knife designed to punch through armor. Bob explains how this narrow, reinforced blade became both a battlefield sidearm and a richly decorated status object across Persia, Afghanistan, and India. In the State of the Collection, Bob shows off his Edgy American Junkie knife, freshly returned from Shane of Edgy American Bladeworks with a new finish, a reground CruWear blade, a razor edge from Kyle Conley of Clinging Verks Sharpening, and a new leather sheath from 1931 Leatherworks. He also unboxes the Jack Wolf Knives Gateway Barlow in Miami CamoCarbon from the second production run. Whether you are a Microtech fan already or just getting curious about the brand, this episode gives you an honest look at what makes these knives worth collecting, straight from someone who carries them hard and knows the difference between the real deal and everything else. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/661. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
On Episode 660 of The Knife Junkie Podcast ( www.theknifejunkie.com/660 ), Bob DeMarco is joined by Rikki Hernandez, also known as CaptRikki, a professional videographer turned knife content creator who is making a name for himself by telling the stories behind the blades. Rikki shares how he went from filming bodybuilders, wildlife, and music producers to building a YouTube channel and Instagram account dedicated to the knife world. His entry point was not knife collecting but photography, and that creative eye is what drives his unique approach to content. Rather than focusing on specs and steel, Rikki puts the maker front and center, telling the story of why a knife was designed and of the personal experiences that shaped it. In this episode, Rikki talks about makers who have inspired him, including Bob Terzuola, Lucas Burnley, Daniel Winkler, and Shane Magnussen of Scorpion 6. He also shares a memorable story about a phone call from Doug of Attention to Detail Mercantile that turned a critical review into a lasting friendship. Rikki and Bob discuss the shift from production knives to custom pieces, the CRK Sebenza as the Rolex Submariner of the knife world, and why content creators should not feel pressured to cover every new product release. Rikki also reflects on what he learned working as the editor and videographer for Best Damn EDC before launching his own channel. Whether you are into custom fixed blades, production folders, or just love a good maker story, this episode has something for you. Find CaptRikki on YouTube at https://www.youtube.com/@CaptRikki and on Instagram at https://www.instagram.com/capt.rikki . Be sure to support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. You can also support The Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives . Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen . And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost .
Bob DeMarco counts down 12 totally unique folding knife designs on this week\'s episode of The Knife Junkie Podcast. From the Civivi Vision FG and its innovative locking mechanism designed by Snecx to the Microtech Stitch with its Borka Blades-designed profile and Ram-Lok system, Bob walks through a dozen folders, each bringing something different to the knife world. Along the way, he shares what changed his mind about the Off-Grid Knives Raptor, why the Pinkerton Knives Feral Folder is built for real-world self-defense, and what makes the DC Blades Sting one of the most ergonomic reverse-grip folders he has handled. The episode opens with a Pocket Check featuring the Microtech SOCOM Elite Ram-Lok, the Jack Wolf Knives Gunslinger Jack, the Hogtooth Knives Ruffian, and the Jed Hornbeak Necromance. In Knife Life News, Bob covers a new 14C28N slip joint from RoseCraft Blades, a new Exskelibur from Boker in proprietary BKR-10 steel, the return of the Kopis Designs L-Via at KnivesShipFree, and Buck\'s 13th Stealth Run, an automatic 110 in CPM MagnaCut. The First Tool segment takes a trip through the history of the Italian stiletto switchblade, from its origins as a Renaissance-era thrusting dagger to the iconic automatic knives that emerged from Maniago, Italy, after World War II. Bob traces the cultural impact from the Beltrame family workshops to the Federal Switchblade Act of 1958. In State of the Collection, Bob shows off the new AUX MFG Deadhead Pocket Bowie Frame Lock, the folding version of a fixed blade he has been carrying for months. With an M390 blade, a fluted titanium handle, and Michael Jarvis\'s signature coffin-shaped design, Bob calls it an outstanding addition to the Auxiliary Manufacturing lineup. Whether you are a collector looking for something that stands out or just want to stay current on what is new in the knife world, this episode has something for everyone. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/659. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our preferred platform: https://theknifejunkie.com/podhost.
On Episode 658 of The Knife Junkie Podcast, host Bob \"The Knife Junkie\" DeMarco presents 15 of the best everyday defense blades — or EDD blades — available today. Unlike standard EDC knives, EDD blades are purpose-built for personal defense, with blade geometry, grip ergonomics, and sheath systems designed to enable fast, reliable deployment in real-world defensive situations. Bob covers 15 options that span the full range from affordable production knives to small-batch makers and custom-adjacent designs. Whether you carry a pocket fixed blade or a defensive folder, this episode gives you a strong shortlist to work from. Before getting into the main topic, Bob opens with a pocket check featuring the Microtech SOCOM Elite Auto, the JWK Timber Jack, the Hogtooth NoVA-2, and the Cold Steel Espada XL in ESK. Knife Life News covers four current stories: a new Ostap Hel design from Bestech, an upcoming Torbé/Civivi collaboration, a maritime-themed folder from GiantMouse, and a classic reproduction from TOPS Knives in partnership with another legendary American brand. The First Tool segment examines the Roman pugio—the compact dagger carried daily by Roman legionaries as a personal-defense backup—and how it connects directly to the philosophy behind modern EDD carry. Bob also highlights two additions to the State of the Collection: Jack Wolf Knives' Gunslinger Jack and Norman Tactical's Fighting Bowie. The main segment covers 15 EDD blades in detail, including the Fisher Blades Beckwith Covert, the Amtac Blades Northman, the Cold Steel Urban Edge, the TKell Agent 001, the AB Knives 302, the Regiment Blades Lo-Viz, the Gunfighter Customs Gunfighter, the TOPS Felony Stop, the Hogtooth Knives EDC Tanto, the Pinkerton Knives Matador, the Brock Blades Magni XL, the Gross Motor Gear Mamushi Mini, the AUX MFG Pocket Rocket, the Kramer Customs Voodoo, and the Savage Creature Defense Tools Masako Hachi. Bob explains what makes each blade stand out in the EDD category, covering carry methods, blade geometry, grip design, and real-world defensive applications. This episode is essential listening for anyone who takes everyday defensive carry seriously, from new to the EDD concept to experienced carriers looking to expand or refine their options. Bob brings years of study in martial arts and blade culture to this list, and every knife on it earns its spot for a reason. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/658. Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives. You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen. And for professional podcast hosting, use our podcast platform of choice: https://theknifejunkie.com/podhost.
In Episode 657 of The Knife Junkie Podcast, host Bob DeMarco counts down his personal list of 10 great combat knives—real-world fixed blades built for fighting utility, not just show. From the IDF-inspired TKell Knives Outrider to the legendary USMC KA-BAR to a Bill Harsey-designed Spartan Blades Kukri, Bob walks through each knife with honest commentary on steel, design, ergonomics, and real carry experience. Whether you are a collector looking for your next fixed blade or just want to understand what separates a great combat knife from a great dagger, this episode breaks it down clearly and without the fluff. Before the main event, Bob runs the Pocket Check with four knives he has been carrying: the Off-Grid Knives Polaris XL in Vanax steel, the Jack Wolf Knives Timber Jack, the Bald Man Knife and Tool Serpico, and the TOPS Wild Pig Hunter. He also covers the latest Knife Life News, including the WE Knife Co. Nivron flipper, the Boker Club Knife modern traditional, the TOPS Lil Chete, and the RoseCraft Blades Barren Fork Jack, now featuring 14C28N steel. The episode also includes a First Tool segment on Nessmuk—the 19th-century outdoorsman who argued that lighter was smarter and changed American camping culture with a short, wide-bellied fixed blade and a philosophy that most bushcrafters still follow today. Bob also shows off three daggers from the State of the Collection—a Randall No. 2-7 Combat Stiletto, the Ek-44, and the Spartan Harsey Dagger—to draw a clear line between a pure fighting blade and a true combat knife. Also covered: the February 2026 Gentleman Junkie giveaway knife, the Knives by Nuge Textured Wicket, and going to one lucky Patreon member or YouTube member on Thursday Night Knives, February 19. And a shoutout to sponsor 3 Dog Knife—Alaska-made outdoor fixed blades available at theknifejunkie.com/3dogknife , and save 25% off with the code knifejunkie. Find the list of all the knives shown in the show and links to the Knife Life news stories at https://theknifejunkie.com/657 . Support the Knife Junkie channel with your next knife purchase. Find our affiliate links at https://theknifejunkie.com/knives . You can also support The Knife Junkie and get in on the perks of being a patron, including early access to the podcast and exclusive bonus content. Visit https://www.theknifejunkie.com/patreon for details. Let us know what you thought about this episode and leave a rating and/or a review. Your feedback is appreciated. You can also email theknifejunkie@gmail.com with any comments, feedback, or suggestions. To watch or listen to past episodes of the podcast, visit https://theknifejunkie.com/listen . And for professional podcast hosting, use our podcast platform of choice: https://theknifejunkie.com/podhost .
Ranking source
Apple Podcasts rankings via the Mato Topic Intelligence Platform.
Observed September 17, 2026. Cached outside the daily freshness window; the positions keep the date they were taken on.
Apple and Apple Podcasts are trademarks of Apple Inc., registered in the U.S. and other countries.
Pairs with
Bring this source into Mato to read its transferable patterns, then turn them into an original show for your own audience.